The Application in Cold Insulated Equipment
 |
• Igloo Thermal™ VIP (vacuum insulating panel) when used in refrigerators can substantially lower energy costs and saves up to 10%-30%. Due to the high performance of the Vip panels using thinner walls compared to the conventional insulation products currently in the market it can increase the capacity by 20%-30%.One time expenditure costs of applying VIP is the same as the energy-savings of 7-10 years of refrigerator usage.
• The comparison of the VIP when used in deepfreeze to PUF or PSF as insulating material, the heat reserving period is only 1-2 days; after applying VIP, the insulating period can be postponed to 4-5 days, it is cost effective in terms of shipping it can be shipped using air freight rather then sea freight due to the light weight of the panels.
• VIP used in cold storage box: comparing Under the condition that store the same items in the container.
- 1) When using PU foam as insulating material, the dimension it uses in cold storage is 57cm,50cm,50cm, with insulation thickness of 3.8 cm, with a total weight of 21.8kg refrigerant in the box, the insulating period is 120h.
- 2) When using VIP as insulating material, the dimension it uses in cold storage is 33cm,46cm,28cm with insulation thickness of 2.5cm with a total weight of7kg refrigerant in the box with a performance of 200h insulating period.
If applying the VIP, the volume of cold storage can be reduced by 70%, the refrigerant can be reduced by 68%, and the insulating period can also be prolonged by 66%which makes Igloo Thermal™ VIP superior in quality, energy & space saving and best insulation material found in the world today.
Refrigerator for biomedicine and experimentation room Super low temperature: -30 °C -86°C
Cold storage car and freeze container
 |
 |
20mm VIP is
equivalent to 200mm polystyrene foam. |
The red line
shows the VIP panel |
The two types of VIP applied on wall:
 |
 |
|
Type 1 |
Type 2 |
 |
Applications:
 |
 |
Deepfreeze vehicles |
Cold storage |
 |
Cold storage and freeze container |
 |
 |
Medical Incubator |
Refrigerator for biomedicine and experimentation room |
The Insulating Principle
The knowledge is quite simple: the fewer molecules in the insulation, the less heat transfer. This principle also applies to the heat preservation for any applications, this way it will not only reduce the thickness of the wall, but also supply the best insulating effects. VIPs insulating effect is 10 times better than conventional insulations, in result you are able to build walls that are thinner than using traditional insulation products which eliminate space confinements when using conventional insulation products.
The principle of thermos was well-known for a century, the method
simple if one evacuates all air from the glass tube then seals it;
it will generate low pressure which can reduce the heat transfer
greatly to achieve the insulating purpose; either to remain warm
or cool.
The VIP panels can fully isolate the heat transfer in the vacuum
spaces.
This principle can also be applied to heat preservation residential/commercial,
using Vip for residential/commercial will not only reduce the thickness
of wall, but also supply the best thermal insulation. It has been
proven that VIPs insulating effect is 10 times better than conventional
insulations.
| << Previous Page | |
