Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Vacuum Insulation Panel

Introduction Igloo Thermal ™ Vacuum Insulation Panel (VIP)


The foreign displayed
VIP products

  

Igloo Thermal™ Vacuum Insulation Panel (VIP) is a new highly-efficient thermal insulation material which was developed in 2006.
The VIP’s are constructed using a special technique by inserting the open-celled filler into a centralized sealed barrier.
Using the core material which provides the structural strength and resistance for heat transfer makes the VIP extremely efficient in low thermal conductivity that has less than 0.005w/m.k.

The VIP has been proven to have performance that exceeds the conventional insulation products by far. Vacuum Insulation panels are our new highly- efficient thermal insulation. It is created by inserting the open celled filler into a centralized sealed barrier. The core material provides the structural strength and the resistance to heat transfer.

For Client Testimonials on VIP Panels Click Here


Applications:


  • 1. Cold insulated equipments for different industries
  • 2. Shipping containers
  • 3. Spaceflight/ Aviation
  • 4. Communication/ transportation
  • 5. Medical Refrigerators and freezers
  • 6. recreational and commercial marine vehicles
  • 7. Civil refrigeration equipment
  • 8. Insulation for construction

Advantages:

  • 1. 7- 10 times better insulation value then conventional insulations
  • 2. Thin wall, small volume, lightweight
  • 3. Extremely low thermal conductivity 0.005w/m.k
  • 4. Resistance to heat transfer among the gas molecules
  • 5. Non-ODS material
  • 6. environmentally friendly
  • 7. Meets all insulating requirements

Specification:

  • 1) Open cell rate: 96%
  • 2) Cell diameter: 150 - 200mm
  • 3) Compressive Strength: 0.14MPa - 0.25MPa
  • 4) Thickness: 10 - 35mm
  • 5) Maximum Dimensions: 1600 x 700 x 35mm
  • 6) Core Material: Superfine fiberglass
  • 7) Thermal Conductivity: less than 4mw/m.k (under standard environmental condition: ambient temperature 24 °C, relative humidity 50%)
  • 8) Density: about 230kg/m3
  • 9) Internal Pressure: 0.1Pa
  • 10) Operating Ambient: -50 ~ 70°C
  • 11) External Tolerance of VIP: 1mm
  • 12) Packing: carton with foam and air bubble film
  • 13) Service Life: 10-15 years under standard environmental conditions

click for larger view

Structure:
The VIP (vacuum insulation panel) consists of three components, core material, barrier, and envelope.

Core Materials: Fiberglass, Phenolic Foam

Barrier/ Envelope: Combination of multilayer polymer film, Aluminum foil, Ultra high barrier (Getter®/ Desiccant®) which is imported from Italy

 

Next Page >>