The Laminating Conveyor
 |
The laminating conveyor is used for
the laminating and the shaping of the sandwich panel. This machine
adopts the driving structure of drag chain. The chain is made of
fine aluminum alloy and is 18m long. The moving speed is 3-8m/min
and is controlled by frequency conversion. If the customers want
to improve the moving speed, we can customize a longer conveyor. |
The thickness is controlled by the space between the upper link plate and the lower. The startup of the link plate is control by fluid drive. The 12 tilt cylinder is adjustable so that the link plates can be stopped at any position.
The Heated Air Circulation Device
To meet the expected requirement of foaming technology, the production line is equipped with a heated air circulation device. It's used to heat the link plates to 70° (Celsius). It's made up of one hot blast stove, one diesel-oil-derived stove and two temperature sensors. The temperature sensors are placed at the inlet port and inside the conveyor so the technician/operator can monitor the temperature fluctuation.
 |
The Automatic Tracking Cutting Machine The panels are cut into different lengths by this machine. |
| MAIN TECHNICAL PARAMETER OF THE PRODUCTION LINE | ||
| Specification of Sandwich Panel |
Width*Thickness (mm) | 1200×(20~200) |
| The Production Speed | m/min | arbitrary |
| The Embossing Speed | m/min | <20 |
| The Mixing Speed | round/min | 4500 |
| The Moving of Injection Head | Mpa | <80 |
| The Max temperature of the heated air circulation device | times/min | 70 |
| The Laminating Length of the Conveyor | °C | 18.82 |
| The Max start-up Speed of the Conveyor | M | 300 |
| Total Power | KVA | 85~125 |
| The Specification of the Production Line | °C | 40950x5620x3700 |
| The Specification of the Embossing Machine | mm | |
| Weight | T | ~34 |
Note: The above information is for our standard
production line and we can produce/customize our machines according
to our customers' request and specification.
 |
 |
PF Pre-insulated Board Composite Aluminum Foil |
Phenolic Foam Isulation Panel with Aluminum Foil & Fiberglass |
| << Previous Page | |
